The Value of Lighting：

SECURITY, ECONOMICS, AESTHETICS

►An example of energy-saving  individuals feel more secure when walking or driving in a well-lighted area lighting

► Lighting may draw people into a commercial area and lead to an increase in commerce garage upgrade

The Difference Between An Old Parking Facilities and Upgraded Parking Facilities:

The lighting is yellow and cast shadows that created a murky effect throughout the structure.

The improved lighting can improve the comfort, safety and pleasure of drivers and pedestrians.

Over-lighting above-ground parking facilities with open exterior sides can create trespassing issues.

Application of anti glare smart LED fixtures make the light be more soft.

Garage Lighting Pain Points

1. Unable to control device based on area

Base on wiring circuit: one on, all on, one off, all off. Big scenes cause big waste

2.  Unavoidable over design

Considering light attenuation based on lighting design specifications cannot avoid over design. Waste in the early stage and insufficient in the later stage

3.  24 Hours Full Power Operation

Life cycle full power operation Greatly increase luminous decay and Reduce lamp life.

4.  Manual inspection for faults

Whether the equipment operates normally depends on the inspection by personnel, can not find the fault in time. Moreover, it is impossible to  give early warning according to the service life.

5.  Short sensing distance

Single lamp’s sensing distance is 6-8 m. When the vehicle speed is more than 20km/h, it is embarrassing that the lights turn on after the vehicle pass.

6.  Cumbersome operation and maintenance

Lamp failure requires professional operation and maintenance, the cost is high.

Morstar Core Value

• Energy Visualization

Realize energy visualization through energy data, pay real-time attention to lighting energy consumption, and formulate energy-saving strategies through linkage strategies to achieve a dynamic balance between comfort and energy conservation.

• Unified management of lighting system

Change the situation that the original equipment cannot be managed uniformly, and use one client to complete a series of control strategies such as monitoring, control, linkage, status management, energy consumption visualization, etc. of all lighting equipment.

• Failure Supervision

Statistics and analysis of equipment operation status are carried out through the system, and real-time alarm is given to the equipment in fault, so as to make the building operation and maintenance more accurate and timely.

• Comfortable Light Environment

Based on a variety of lighting scenes and human lighting control, it creates new value for light and gives buildings a more comfortable and healthy light environment experience.

Morstar Solution

Partition management：Autonomous Zone lighting control

It is not limited by the wiring of strong current lighting circuit. In the later stage, the area can be redivided according to the actual use needs of the customer's parking lot to meet the needs of different stages.

Three stage: Induction & Brightness Automation

It supports setting the brightness and lighting duration of lighting equipment under each section of linkage

Automatic setting of three-stage induction brightness:

According to the inductive state, divided into:
- Sensing someone
- Sensing nobody
- Sensing nobody continuously

MORLINK SMART LIGHTNG SYSTEM

An mobile application can help you make better use of the wireless control system, and provide flexibility and possibilities for parking garage management and an ultimate smart experience. Morstar's helps user reach energy reduction goals with large energy savings and costs.
If use Bluetooth Controller System- Control signal with a "cloud-based" system can convey commands to the luminaires, but the central control can be located in the garage office.

The parking facilities are more suitable for networking, and the interactive operating system can also monitor, diagnose and report on individual luminaire problems, including the time when the incident started. The combination of smart systems and luminaires can maximize service life and save energy, while improving the experience of drivers and pedestrians. In addition, it can help you get the most benefit from lighting.

* Figures are based on the conversion from 175W lamp metal halide luminaires operating 24/7 to 70W LEDs with a networked wireless control system. Costs assume
$0.10/kWh utility rate, $40 per metal halide lamp change and typical energy reduction from dimming and system tuning.

Energy saving rate: above 85%

1. When the built-in sensor of the lamp senses that the vehicle is moving in,  it will automatically brightening the lighting in this area. It also links the lamps in adjacent areas to ensure the safety of vehicle driving. When there is no vehicle passing, it will maintain a low brightness state as required.

2. The built-in radar sensing LED lamp realizes the dimming control of regional lighting by monitoring the movement of human body and vehicles. Different lighting strategies are set in the peak period, and the energy saving can reach more than 80%.The energy consumption is continuously optimized through the system multi regional data analysis.Intelligent Lighting System For Parking Lot

3. If the equipment is abnormal, the system will automatically send message. The equipment data can be migrated with one click, and the equipment can be directly replaced. This improves the operation and maintenance efficiency. Follow up the maintenance progress in real time through the online system.

smart Shoebox Light Fixturesmart	Smart LED Vapor Tight Light Series	LED smart Canopy Light Sensor Control